Fireplacecare Chimney Solutions | Masonry

Chimney Masonry Repair in Burbank: Mortar, Brick, Price

Describe Your Fireplace

By sending, you agree Fireplacecare Chimney Solutions may contact you by call, automated text or email about your request. Consent isn't required to buy. Msg & data rates may apply; reply STOP to opt out. Privacy Policy

Chimney Masonry Repair in Burbank: Mortar, Brick, Price

Chimney masonry repair in Burbank starts at the hearth

If you need chimney masonry repair in Burbank, you are looking for a mason: someone who can regrind a joint, set a brick and match the mortar to what is already there. Fireplacecare Chimney Solutions works from Burbank and starts every visit in the room, at the firebox, the damper and whatever sits in the opening. What the fireplace shows decides what the chimney needs next.

That order matters for masonry. A gap in the firebox joints, a flaking brick on the face of the hearth or a white powder on the stack are the signs the owner sees. The cause is often higher up, where rain and temperature swings wear the mortar from the outside. We read both ends before quoting.

Masonry repair has no shortcut an owner can take. Mortar has to be ground out to depth, repacked in layers and matched in color and strength. A tube of patch material from a store sits on the surface and falls out.

Ask for a masonry quote and we will send a mason to look at the whole stack.

What is on the list

Masonry repair is a family of jobs. A written quote names the one you need:

  • - Tuckpointing and repointing: grinding out failed mortar joints and repacking them.
  • Brick replacement: removing spalled or cracked brick and setting new brick, color matched.
  • Mortar joint restoration: using Type N or Type S mortar depending on the brick and where the joint sits.
  • Waterproofing: a sealant applied after the repair so the work holds.
  • Earthquake damage assessment: cracks and shifted courses read for cause before anything is patched.

The firebox gets the same attention. Joints inside the firebox take heat, and those joints are repaired with the right material, not the mortar used on the outside of the stack.

What sets the price

We do not publish a masonry price, because it depends on what the mason finds. A joint here and there is a short visit. A stack with failed mortar on every course is a different job. The main inputs:

  • - How many joints have failed, and how deep the damage goes.
  • How many bricks are spalled or cracked, and whether the color match is straightforward.
  • Which part of the chimney: the firebox, the face of the stack or the top courses above the roof.
  • Access, including stack height and roof pitch.
  • Whether water has gotten into the liner or the smoke chamber behind the damage.
  • Whether waterproofing goes on after the repair.

A written quote lists each of these as its own line. You get joint photos before the work and after it, so the scope you agreed to is the scope that was done.

How a visit and quote work

The visit goes from the room to the roof:

  • - The technician opens the damper and looks at the firebox walls and joints.
  • They check the hearth and the face of the masonry for cracks and flaking.
  • They go up and look at the stack, the top courses and the mortar joints.
  • They photograph each problem area.
  • They write the scope and the price, and send it to you.

The report is written so that a second contractor could price it. That is deliberate. A quote you can compare is a quote you can trust.

Book the masonry visit and get the scope in writing.

Why early repair keeps the job small

Mortar does not fail overnight. It wears down slowly first, under rain, wind and shifting temperatures. Caught early, it stays a tuckpointing job. Left alone, it becomes brick replacement, and after that a rebuild of the top of the stack. Each stage costs more than the one before it.

So if you see a loose joint or a brick that crumbles at the touch, the time to call is now, not after the next storm. We will not push a bigger job when a smaller repair solves the problem. We will tell you if a small repair will not last.

Picking a mason for a Burbank chimney

Compare quotes on what they say, not only on the total:

  • - Does the quote name the mortar type and the color match?
  • Does it say whether the work is tuckpointing, replacement or a rebuild?
  • Is waterproofing included, and what product?
  • Are photos of the damage included in the written scope?
  • Does the contractor check the firebox as well as the stack?
  • Is there a damage assessment if the cracks look like they came from shaking?

If a contractor will not itemize the quote, ask why. A mason who knows the job can write it down.

Call or send the form

Fireplacecare Chimney Solutions serves Burbank, Glendale, Studio City, Sherman Oaks, Pasadena, Los Angeles and the rest of the San Fernando Valley. Call (747) 216-0362 to book a masonry visit, or send us the form and ask for a written quote. The mason looks at the fireplace first, then the stack, then writes down what needs doing and what it costs.

Is Your Fireplace Telling You Something?

Smoke in the room, a damper that sticks, cloudy glass doors or gas logs that will not stay lit. Describe it to Fireplacecare Chimney Solutions in Burbank and we will tell you where we would start, at the hearth and then the chimney.

Call (747) 216-0362